ioLogik E2210 Universal I/O, 12 DI’s + 8 DO’s with Click&Go

Part #: M IOLOGIK E2210

Universal controller, 12 DIs, 8 DOs, Click&Go, -10 to 60°C operating temperature
  • Overview
  • Specifications
  • Downloads
  • Overview

Ethernet Micro RTU Controller with 12 digital inputs and 8 digital outputs

Note: The Green Core Product Identity of the ioLogik series will be phased in starting May 1, 2014. During the product transition period, you may still receive products that use the previous panel design. Please click here to learn more about Moxa’s Green Core product transition.

Features and Benefits 

  • Active communication with patented Active OPC Server
  • Smart Alarm management with email, SNMP Trap, TCP, UDP
  • Supports SNMPv1/v2c/v3 protocol
  • Save time and wiring costs with  peer-to-peer communication
  • Front-end intelligent with patented Click&Go control logic, up to 24 rules
  • Friendly configuration with web browser

Introduction

Moxa’s ioLogik E2200 is a new type of Ethernet micro RTU controller, which is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices. Unlike traditional RTUs, which are passive and must poll for data, Moxa’s ioLogik E2200 series with Active OPC Server makes seamless connection with SCADA systems a reality. In addition, SNMP is used for communicating with an NMS (Network Management System) for IT field users. The I/O status of an Ethernet micro RTU controller can be reported and controlled automatically on-site based on user specified conditions. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.

Active Alarming with Local Intelligence

The ioLogik E2200 Micro RTU supports simple and powerful Click&Go™ technology to deliver event-driven reports and allow alarm messages to be sent by email, TCP/UDP, and SMNP Trap with real-time   stamps. With built-in Click&Go™ intelligence, the ioLogik E2200 micro RTU can be used for simple output control when it is triggered by input status, without the need for a PC controller. The ioLogik E2200 micro RTU reports I/O status automatically based on user-specified conditions. This report by-exception approach requires far less bandwidth than the traditional polling approach.

  • Specifications
Inputs and Outputs
Digital Inputs12 channels
Digital Outputs8 channels
Isolation3k VDC or 2k Vrms
Digital Input
Sensor TypeWet Contact (NPN), Dry Contact
I/O ModeDI or Event Counter
Dry Contact• On: short to GND
• Off: open
Wet Contact (DI to GND)• On: 0 to 3 VDC
• Off: 10 to 30 VDC
Common Type12 points per COM
Counter Frequency900 Hz
Digital Filtering Time IntervalSoftware Configurable
Digital Output
TypeSink
I/O ModeDO or Pulse Output
Pulse Output Frequency1 kHz
Over-voltage Protection45 VDC
Over-current Protection2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown175°C (min.)
Current Rating200 mA per channel
Power Requirements
Power Consumption203 mA @ 24 VDC
MTBF (mean time between failures)
Time213,673 hrs
DatabaseTelcordia (Bellcore)
LAN
Ethernet1 10/100 Mbps RJ45 port
Protection1.5 kV magnetic isolation
ProtocolsModbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP
Serial Communication
InterfaceRS-485-2w: Data+, Data-, GND (3-contact terminal block)
Serial Line Protection15 kV ESD for all signals
Serial Communication Parametres
ParityNone
Data Bits8
Stop Bits1
Flow ControlNone
Baudrate1200 to 115200 bps
ProtocolModbus/RTU
Power Requirements
Power Input24 VDC nominal, 12 to 36 VDC
Physical Characteristics
WiringI/O cable max. 14 AWG
Dimensions115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weightunder 250 g
MountingDIN rail or wall
Environmental Limits
Operating TemperatureStandard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
AltitudeUp to 2000 m
NotePlease contact Moxa if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
SafetyUL 508
EMIEN 61000-3-2; EN 61000-3-3; EN 61000-6-4;
FCC Part 15, Subpart B, Class A
EMSEN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
EN 61000-4-5, EN 61000-4-6, EN 61000-4-8,
EN 61000-4-11, EN 61000-6-2
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6
Green ProductRoHS, CRoHS, WEEE
NotePlease check Moxa’s website for the most up-to-date certification status.
Warranty
Warranty Period5 years (excluding ioLogik E2214*)
*NoteBecause of the limited lifetime of power relays, products that use that component are covered by a 2-year warranty.
DetailsSee www.moxa.com/warranty
  • Downloads