ioLogik E1214 Universal I/O, 6DI’s + 6 Relays

Part #: M IOLOGIK E1214

Universal I/O, 6 DIs, 6 relays, -10 to 60°C operating temperature
  • Overview
  • Specifications
  • Downloads
  • Overview

Ethernet Remote I/O with 2-port Ethernet switch, 6 DIs, and 6 Relays

Note: The Green Core Product Identity of the ioLogik series will be phased in starting May 1, 2014. During the product transition period, you may still receive products that use the previous panel design. Please click here to learn more about Moxa’s Green Core product transition.


Features and Benefits 

  • Support Modbus/TCP Protocol
  • Active communication with patented Active OPC Server
  • 2-port Ethernet switch for daisy-chain topologies
  • Easy mass deployment and configuration with ioSearch utility
  • Save time and wiring cost with peer-to-peer communication
  • User-defined Modbus/TCP addressing
  • Simplify I/O managment with MXIO library on either Windows or Linux platform
  • Supports SNMPv1/v2c
  • UL/cUL Class I Division 2, ATEX Zone 2 certification
  • Wide operating temperature: -40 to 75°C ( -40 to 167°F )


Daisy-chained Ethernet I/O Connection

A new daisy-chained Ethernet I/O concept is now available. The ioLogik E1214 industrial Ethernet remote I/O has two embedded Ethernet switch ports that allow information to flow to another local Ethernet device or connect to the next ioLogik in the daisy-chain.

Applications such as factory automation, security and surveillance systems, and tunnel monitoring, can make use of daisy-chained Ethernet for building multi-drop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with the multi-drop configuration typically used in fieldbus applications. The daisy-chain function on the Ethernet remote I/O ioLogik E1214 not only increases the connection between machines and panels, but also lowers the cost of buying separate Ethernet switches, and at the same time reduces labor fees and cabling by a large percentage. For example, if a production facility contains 700 stations (20 points per station), the wiring cost reduction can reach 15% of the total implementation cost.

Saving Time and Wiring Costs with Peer-to-Peer Communications

In remote automation applications, the control room and sensors are often far removed, making wiring over long distances a constant challenge. With peer-to-peer networking, users may now map a pair of ioLogik E1200 series modules so that input values will be directly transferred to output channels, greatly simplifying the wiring process and reducing wiring costs.

User-definable Modbus/TCP Addressing for Painless Upgrading of Existing Systems

For Modbus devices that are controlled and detected by fixed addresses, users need to spend a vast amount of time researching and verifying the configurations. Users need to locate each device’s networking details like I/O channels, or vendor-defined addresses to enable the initial or start address of a SCADA system or PLC. The ioLogik E1200, with user-definable Modbus/TCP addressing, offers greater flexibility, and setup is easy. Instead of worrying about individual devices, users simply configure the function and address map to fit their needs.

  • Specifications
Inputs and Outputs
Digital Inputs6 channels
Relay Outputs6 channels
Isolation3k VDC or 2k Vrms
Digital Input
Sensor TypeWet Contact (NPN or PNP), Dry Contact
I/O ModeDI or Event Counter
Dry Contact• On: short to GND
• Off: open
Wet Contact (DI to COM)• On: 10 to 30 VDC
• Off: 0 to 3 VDC
Common Type6 points per COM
Counter Frequency250 Hz
Digital Filtering Time IntervalSoftware Configurable
Relay Output
TypeForm A (N.O.) power relay
Contact Current RatingResistive Load: 5 A @ 30 VDC, 250 VAC, 110 VAC
Breakdown Voltage500 VAC
Relay On/Off Time1500 ms (max.)
Initial Insulation Resistance1000 M ohms (min.) @ 500 VDC
Mechanical Endurance5,000,000 operations
Electrical Endurance100,000 operations @ 5 A resistive load
Contact Resistance100 m ohms (max.)
Pulse Output0.3 Hz at rated load
NoteAmbient humidity must be non-condensing and remain between 5 and 95%. The relays of the ioLogik E1214 may malfunction when operating in high condensation environments below 0° Celsius.
Power Requirements
Power Consumption188 mA @ 24 VDC
MTBF (mean time between failures)
Time808,744 hrs
DatabaseTelcordia (Bellcore)
Ethernet2 switched 10/100 Mbps RJ45 ports
Protection1.5 kV magnetic isolation
Power Requirements
Power Input24 VDC nominal, 12 to 36 VDC
Physical Characteristics
WiringI/O cable max. 14 AWG
Dimensions27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
WeightUnder 200 g
MountingDIN rail or wall
Environmental Limits
Operating TemperatureStandard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
AltitudeUp to 2000 m
NotePlease contact Moxa if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
SafetyUL 508
EMIEN 55022; EN 61000-3-2; EN 61000-3-3;
FCC Part 15, Subpart B, Class A
EMSEN 55024, EN 61000-4-2, EN 61000-4-3,
EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
EN 61000-4-8, EN 61000-4-11
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6
Green ProductRoHS, CRoHS, WEEE
Hazardous LocationUL/cUL Class I Diision 2, ATEX Zone 2
Warranty Period5 years (excluding ioLogik E1214)
NoteBecause of the limited lifetime of power relays, products that use this component are covered by a 2-year warranty.
  • Downloads