The NPort S9000 is the world’s first device server that supports IEC 61850 MMS for Power SCADA systems to monitor all networks and devices in substations.
Field to SCADA Interoperability for Legacy Substation Retrofit
Unified MMS Communication for Legacy System Retrofit
Real-time monitoring is challenging but crucial for mission-critical applications, such as public utilities and oil and gas, and especially for those using legacy equipment at their field sites. Moxa’s NPort S9000 device servers provide the answer to this challenge with integrated IEC 61850 MMS and serial-to-Ethernet communication to facilitate vertical integration between field legacy equipment and SCADA systems.
The NPort S9000 Series is the world’s first serial device server that can migrate serial Intelligent Electronic Devices (IEDs) to an IEC 61850-based infrastructure for legacy substation retrofits.
First, the NPort S9000 device servers connect Modbus and DNP3-based IEDs to an Ethernet network with up to 16 serial ports. At the same time, the NPort S9000 uses IEC 61850 MMS protocol to monitor the serial IEDs’ status and report to both the field controllers and power SCADA systems.
Due to the extensive protocol interoperability range of the NPort S9000, the IEC 61850-based SCADA system can supervise the substation’s entire network, consisting of IEC 61850 compliant devices and legacy IEDs, for real-time monitoring and easy maintenance.
- Supports IEC 61850 MMS protocol
- Up to 16 port serial interfaces
- Supports 4-port Ethernet switching
- Embedded Modbus/DNP3 traffic monitor
- Compliant with IEC 61850-3, IEEE 1613 and C1D2* standards
- *NPort S9450I series only
Advantages
MMS Interoperability
Device-Level Security
The NPort S9000 incorporates security capabilities based on IEC 62443 standards to secure network security from any single access to NPort S9000 device servers.
Extreme Reliability
Diverse industry certifications include IEC 61850-3, IEEE 1613, and Class I Division 2 standards to withstand harsh EMIs, explosion hazards, and other environmental challenges.
Application Note
Substation Retrofit for Total IEC 61850 MMS Solution
A regional substation wanted to enhance the monitoring of their existing legacy infrastructure to prevent outage. Moxa’s NPort S9650I serial device servers support IEC 61850 MMS to implement the IEC 61850 substation retrofit.
IEC 61850 Products
Serial Device Servers
NPort S9650I Series
IEC 61850 Combo Switch/Serial Device Server
- 8/16-port RS-232/422/485
- Up to 4-port Ethernet switch
- COM/TTY drivers for Windows and Linux
- Supports MMS protocol
- Security features based on IEC-62443/NERC CIP
- -40 to 85°C wide operating temperature
Ethernet Switches
PT-7528 Series
IEC 61850-90-4 &IEEE 1613 Class 2
managed Ethernet switches
- Noise Guard for wire speed zero packet loss
- MMS server for easy integration with power SCADA
- IEC 61850 QoS for critical packets transmission
- Fibre Check for all fibre port monitoring
- Configuration Wizard for easy switch setting
Industrial Computers
DA-820 Series
IEC 61850 Native PRP/HSR Computers
- Standard Expansion– 2 PCI, 3 PCIe x1 and PCIe x16
- Industry-proven– IEC 61850-3, IEC 60255
- Data Integrity– Up to 16GB DDR3L ECC Memory
- Accurate Time Sync.– IEEE 1588 & IRIG-B
- Dual Power– Dual Power Supply with Wide Range Input, 24 to 110 VDC or 100 to 240 VAC/VDC