The NPort® 6600 series of secure device servers is the right choice for applications that use large numbers of serial devices packed into a small space. Security breaches are intolerable and the NPort® 6600 ensures data transmission integrity with support of EDS, 3DES, and AES encryption algorithms. Serial devices of any type can be connected to the NPort® 6600, and each serial port on the NPort® can be configured independently for RS-232, RS-422, or RS-485 transmission.
The NPort® 6600 has a built-in LCD panel for configuration. The panel displays the server name, serial number, and IP address, and any of the device server’s configuration parametres, such as IP address, netmask, and gateway address, can be updated easily and quickly.
Note: The LCD panel is only available with standard temperature models.
The NPort® 6600 provides adjustable termination, pull high, and pull low resistors for RS-485 communication. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high and pull low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values works for every environment, the NPort® 6600 allows manual adjustment of the resistor values for each serial port using built-in DIP switches.
Ethernet Interface | |
Number of Ports | 1 |
Speed | 10/100 Mbps, auto MDI/MDIX |
Connector | 8-pin RJ45 |
Magnetic Isolation | 1.5 kV built-in |
Optical Fiber Interface (with network module) | |
Table | |
Serial Interface | |
Number of Ports | 8, 16, or 32 |
Serial Standards | NPort 6610: RS-232 NPort 6650: RS-232/422/485 |
Connector | 8-pin RJ45 |
RS-485 Data Direction Control | ADDC® (Automatic Data Direction Control) |
Serial Line Protection | 15 kV ESD protection for all signals |
Console Port | Dedicated RS-232 console port on rear panel (8-pin RJ45) |
Serial Communication Parametres | |
Data Bits | 5, 6, 7, 8 |
Stop Bits | 1, 1.5, 2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | RTS/CTS, DTR/DSR, XON/XOFF |
Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates) |
Pull High/Low Resistor for RS-485 | 1 kΩ, 150 kΩ |
Terminator for RS-485 | 120 Ω |
Serial Signals | |
RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-2w | Data+, Data-, GND |
Memory Expansion Slot | |
Slot Type | SD socket (supports up to 2 GB) |
Software | |
Network Protocols | ICMP, IPv4/v6, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE |
Security Protocols | DES, 3DES, AES, SSH, SSL |
Configuration Options | Web Console, Serial Console, Telnet Console, Windows Search Utility |
Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
Fixed TTY Drivers | SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X |
Linux Real TTY Drivers | Linux 2.4.x, 2.6.x, 3.x |
Management | SNMP MIB-II |
IP Routing | Static, RIP-I, RIP-II |
Operation Modes | |
Standard | Real COM, TCP Server, TCP Client, UDP, Pair Connection, RFC2217, Terminal, Reverse Telnet, Ethernet Modem, Printer, PPP, Disabled |
Secure | Secure Real COM, Secure TCP Server, Secure TCP Client, Secure Pair Connection, SSH, Reverse SSH |
Applications | |
Terminal Sessions | 8 sessions per port |
Physical Characteristics | |
Housing | Metal |
Weight | NPort 6600-8: 3460 g NPort 6600-16: 3580 g NPort 6600-32: 3600 g |
Dimensions | Without ears: 440 x 195 x 44 mm (17.32 x 7.68 x 1.73 in) With ears: 480 x 195 x 44 mm (18.9 x 7.68 x 1.73 in) |
Environmental Limits | |
Operating Temperature | Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature | -40 to 75°C (-40 to 167°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Altitude | Up to 2000 m |
Note | Please contact Moxa if you require products guaranteed to function properly at higher altitudes. |
Power Requirements | |
Input Voltage | AC Models: 100 to 240 VAC DC Models: ±48 VDC (20 to 72 VDC, -20 to -72 VDC) |
Power Consumption | AC Models: 285 mA @ 100 VAC, 190 mA @ 240 VAC DC Models: 293 mA @ 48 VDC |
Alarm Contact | Relay output with current carrying capacity of 1 A @ 24 VDC |
Power Line Protection | 1 kV burst (EN 61000-4-4: EFT/B), 0.5 kV surge (EN 61000-4-5) |
Standards and Certifications | |
Safety | UL 60950-1, EN 60950-1 |
EMC | CE, FCC |
EMI | EN 55022 Class A, FCC Part 15 Subpart B Class A |
EMS | EN 55024, EN 61000-4-2 (ESD) Level 2/3, EN 61000-4-3 (RS) Level 2, EN 61000-4-4 (EFT) Level 2, EN 61000-4-5 (Surge) Level 2, EN 61000-4-6 (CS) Level 2, EN 61000-4-8 Level 1, EN 61000-4-11 |
Freefall | IEC-68-2-6, IEC-68-2-34, IEC-68-2-32 |
Vibration | IEC-68-2-6, IEC-68-2-34 |
Green Product | RoHS, CRoHS, WEEE |
Reliability | |
Alert Tools | Built-in buzzer and RTC (real-time clock) |
Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
MTBF (mean time between failures) | NPort 6610-8: 135,891 hrs NPort 6610-16: 102,373 hrs NPort 6610-32: 68,707 hrs NPort 6650-8: 135,370 hrs NPort 6650-16: 101,783 hrs NPort 6650-32: 68,177 hrs |
Warranty | |
Warranty Period | 5 years |
Details | See www.moxa.com/warranty |