NPort 5650 Rack Mount Device Server, RS232/422/485, 8 Port

Part #: M NPORT 5650-8

8-port RS-232/422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input
  • Overview
  • Specifications
  • Downloads
  • Overview

8 and 16-port RS-232/422/485 rackmount serial device servers

Features and Benefits 

  • 8 or 16 serial ports supporting RS-232/422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Built-in 15 kV ESD protection for all serial signals
  • Easy IP address configuration with LCD panel (excluding wide temperature models)
  • Configure via Telnet/Web/Windows utility
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • SNMP MIB-II for network management

Overview

With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.

Network Readiness for up to 16 Serial Devices

Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.

19-inch Rackmount Device Server

NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.

Real COM/TTY Ports

Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.

LED Indicators to Ease Your Maintenance Tasks

The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

Adjustable Termination and Pull High/Low Resistors

When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

 

  • Specifications
Ethernet Interface
Number of Ports1
Speed10/100 Mbps, auto MDI/MDIX
Connector8-pin RJ45
Magnetic Isolation Protection1.5 kV built-in
Optical Fiber Interface (for -M-SC and -S-SC)
Table
Serial Interface
Number of Ports8 or 16
Serial StandardsRS-232/422/485
ConnectorRJ45 (8 pins)
Serial Line Protection15 kV ESD protection for all signals
RS-485 Data Direction ControlADDC® (automatic data direction control)
Pull High/Low Resistor for RS-4851 kΩ, 150 kΩ (NPort 5650-8/16)
Serial Communication Parametres
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlDSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate50 bps to 921.6 kbps
Serial Signals
RS-232TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422Tx+, Tx-, Rx+, Rx-, GND
RS-485-4wTx+, Tx-, Rx+, Rx-, GND
RS-485-2wData+, Data-, GND
Software
Network ProtocolsICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration OptionsWeb Console, Telnet Console, Windows Utility
Windows Real COM DriversWindows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY DriversSCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY DriversLinux 2.4.x, 2.6.x, 3.x
Mini Screen with Push Buttons (for standard temp. models)
LCD PanelLiquid Crystal Display on the case
Push ButtonsFour push buttons for convenient on-site configuration
Physical Characteristics
HousingMetal
WeightNPort 5650-8-S-SC, 5650-8-M-SC: 3380 g
NPort 5650-8: 3360 g
NPort 5650-16: 3460 g
NPort 5650-16-S-SC, 5650-16-M-SC: 3440 g
DimensionsWithout ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Environmental Limits
Operating TemperatureStandard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 75°C (-40 to 167°F)
Ambient Relative Humidity5 to 95% (non-condensing)
AltitudeUp to 2000 m
NotePlease contact Moxa if you require products guaranteed to function properly at higher altitudes.
Power Requirements
Input Voltage100 to 240 VAC, 47 to 63 hz
Power ConsumptionNPort 5650-8/16: 158 mA @ 100 VAC, 102 mA @ 240 VAC
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 110 mA @ 240 VAC
NPort 5650-8/16-M-SC: 174 mA @ 100 VAC, 113 mA @ 240 VAC
Standards and Certifications
SafetyUL 60950-1, EN 60950-1
EMCCE, FCC
EMIEN 55022 Class A, FCC Part 15 Subpart B Class A
EMSEN 55024
MedicalEN 60601-1-2 Class B, EN 55011
Reliability
Automatic Reboot TriggerBuilt-in WDT (watchdog timer)
MTBF (mean time between failures)NPort 5650-8: 117,584 hrs
NPort 5650-16: 104,767 hrs
NPort 5650-8-S-SC: 116,914 hrs
NPort 5650-16-S-SC: 87,528 hrs
NPort 5650-8-M-SC: 116,914 hrs
NPort 5650-16-M-SC: 87,528 hrs
Warranty
Warranty Period5 years
DetailsSee www.moxa.com/warranty
  • Downloads