NPort 5150 Device Server, RS232/422/485, 1 Port

Part #: M NPORT 5150

1-port RS-232/422/485 device server, 0 to 55°C operating temperature
  • Overview
  • Specifications
  • Downloads
  • Overview

1-port RS-232/422/485 serial device servers

Features and Benefits 

  • Small size for easy installation
  • Real COM/TTY drivers for Windows and Linux
  • Standard TCP/IP interface and versatile operation modes
  • Easy-to-use Windows utility for configuring multiple device servers
  • Built-in 15 kV ESD protection for all serial signals
  • SNMP MIB-II for network management
  • Configure by Telnet, web browser, or Windows utility
  • Adjustable pull high/low resistor for RS-485 ports

Overview

NPort 5100 series device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN. Use the NPort 5100 series device servers to give your PC software direct access to serial devices from anywhere on the network.

Most Cost-effective Serial-to-Ethernet Solution

Using serial device servers to connect legacy serial devices to Ethernet is now commonplace, and users expect device servers to be cost effective and to provide a broad selection of useful functions. With its full support of Microsoft and Linux operating systems and solid 5-year warranty, the NPort® 5100 series provides the best choice for serial-to-Ethernet converters.

Adjustable Termination and Pull High/Low Resistors

In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, the NPort® 5100 device servers come with jumpers for adjusting termination and pull high/low resistor values for each serial port.

Standard TCP/IP Interface and Broad Choice of Operation Modes

The NPort® 5100 device servers can be configured for TCP Server,TCP Client, UDP Server/Client, Pair Connection, or Ethernet Modem mode, ensuring compatibility with software based on a standard network API (e.g., Winsock or BSD Sockets).

Real COM/TTY Drivers for Existing Software

The Real COM/TTY drivers provided with the NPort® 5100 device servers allow you to continue using software designed for communicating through COM/TTY ports. Installation and configuration is painless, and allows your serial devices and PC to communicate seamlessly over a TCP/IP network. Using Moxa’s Real COM/TTY drivers is an excellent way to preserve your software investment, while still allowing you to enjoy the benefits of networking your serial devices.

Easy to Troubleshoot

NPort® 5100 device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an e-mail alert can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a change in password.

  • Specifications
Ethernet Interface
Number of Ports1
Speed10/100 Mbps, auto MDI/MDIX
Connector8-pin RJ45
Magnetic Isolation Protection1.5 kV built-in
Serial Interface
Number of Ports1
Serial StandardsNPort 5110: RS-232
NPort 5130: RS-422/485
NPort 5150: RS-232/422/485
ConnectorDB9 male
Serial Line Protection15 kV ESD protection for all signals
RS-485 Data Direction ControlADDC® (automatic data direction control)
Pull High/Low Resistor for RS-4851 kΩ, 150 kΩ
Serial Communication Parametres
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlRTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
BaudrateNPort 5110: 110 bps to 230.4 kbps
NPort 5130/5150: 50 bps to 921.6 kbps
Serial Signals
RS-232TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422Tx+, Tx-, Rx+, Rx-, GND
RS-485-4wTx+, Tx-, Rx+, Rx-, GND
RS-485-2wData+, Data-, GND
Software
Network ProtocolsICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP
Configuration OptionsWeb Console, Serial Console (NPort 5110/5150 only), Telnet Console, Windows Utility
Windows Real COM DriversWindows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY DriversSCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY DriversLinux 2.4.x, 2.6.x, 3.x
Physical Characteristics
HousingMetal
Weight340 g
DimensionsWithout ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
Environmental Limits
Operating TemperatureStandard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-20 to 75°C (-4 to 167°F)
Ambient Relative Humidity5 to 95% (non-condensing)
AltitudeUp to 2000 m
NotePlease contact Moxa if you require products guaranteed to function properly at higher altitudes.
Power Requirements
Input Voltage12 to 48 VDC
Power ConsumptionNPort 5110: 128.7 mA @ 12 V, 72 mA @ 24 V
NPort 5130/5150: 200 mA @ 12 V, 106 mA @ 24 V
Standards and Certifications
SafetyUL 60950-1, EN 60950-1
EMCCE, FCC
EMIEN 55022 Class A, FCC Part 15 Subpart B Class A
EMSEN 55024
Reliability
Automatic Reboot TriggerBuilt-in WDT (watchdog timer)
MTBF (mean time between failures)NPort 5110: 279,122 hrs
NPort 5130: 246,505 hrs
NPort 5150: 246,034 hrs
Warranty
Warranty Period5 years
DetailsSee www.moxa.com/warranty
  • Downloads