Moxa ioLogik E1262-T Ethernet Remote I/O

Overview

The Moxa ioLogik E1262-T is an industrial Ethernet remote I/O module with 8 thermocouple channels supporting J, K, T, E, R, S, B, and N sensor types with 16-bit resolution. It serves remote-automation architectures where sensors and actuators are distributed away from the control room. Two 10/100BaseT(X) Ethernet ports allow daisy-chain topologies that eliminate the need for separate switches at each I/O node.

Key Features

• User-definable Modbus TCP Slave addressing for painless upgrades of existing SCADA and PLC systems
• RESTful API support enabling modern IIoT integration alongside traditional industrial protocols
• EtherNet/IP Adapter support for Rockwell and EtherNet/IP control environments
• Peer-to-peer input-to-output mapping reduces long-distance wiring costs
• Active push communication via MX-AOPC UA Server – messages sent only on state change
• SNMP v1/v2c with SNMPv1 Trap for unified IT monitoring
• Two 10/100BaseT(X) RJ45 ports enable daisy-chain topologies without extra switches
• -40 to 75 deg C extended operating temperature for outdoor cabinets and harsh environments

Applications

• Factory automation and discrete manufacturing lines
• Building automation and HVAC monitoring
• Water and wastewater treatment remote sites
• Security and surveillance subsystem I/O
• Energy and utility substation monitoring
• Tunnel and transport trackside equipment

What’s Included

• 1 x ioLogik E1262-T remote I/O module
• 1 x terminal block, 8-pin, 3.81 mm
• 1 x terminal block, 12-pin, 3.81 mm
• 1 x terminal block, 3-pin, 5.00 mm
• 1 x quick installation guide
• 1 x warranty card

Supported Platforms

The ioLogik E1200 Series communicates via Modbus TCP (Server/Slave), EtherNet/IP Adapter, Moxa AOPC Active Tag, RESTful API, SNMP v1/v2c, and the Moxa MXIO library for Windows and Linux. Configuration is available through the web console, the ioSearch Windows utility, and the MCC Tool. The device also supports DHCP Client, BOOTP, and static IPv4 addressing.