EDS-G205A Unmanaged GB Switch, 4 PoE + 1 1000BaseT

Part #: M EDS-G205A-4POE

Unmanaged Gigabit PoE switch with 4 PoE 10/100/1000BaseT(X) ports, 1 1000BaseT port, 0 to 60°C operating temperature
  • Overview
  • Specifications
  • Downloads
  • Overview

5-port full Gigabit unmanaged Ethernet switches with 4 IEEE 802.3af/at PoE+ ports

Features and Benefits 

  • Full Gigabit Ethernet ports
  • IEEE 802.3af/at, PoE+ standards
  • Up to 30 watts output per PoE port
  • 24/48 VDC flexible redundant power inputs
  • Supports 9.6 KB jumbo frames
  • Intelligent power consumption detection and classification
  • Smart PoE over current and short circuit protection
  • -40 to 75°C operating temperature range (T models)

 Introduction

The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full Gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical  high-bandwidth solution for your industrial Ethernet network.

  • Specifications
Technology
StandardsIEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
Processing TypeStore and Forward
Switch Properties
MAC Table Size8 K
Packet Buffer Size136 KB
Jumbo Frame Size9.6 KB
Interface
Fiber Port1000BaseSFP slot
RJ45 Ports10/100/1000BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
PoE PinoutV+, V+, V-, V- for Pin 1,2,3,6 (Endspan, MDI Alternative A)
LED IndicatorsP1, P2, 10/100/1000M, PoE
Power Requirements
Input Voltage24/48 VDC, redundant dual inputs
Input CurrentMax 7.5 A @ 24 VDC (supports up to 4 ports at 30 watts per PoE port)
Overload Current ProtectionPresent
Connection2 removable 2-contact terminal blocks
Reverse Polarity ProtectionPresent
Physical Characteristics
HousingMetal, IP30 protection
Dimensions29 x 135 x 105 mm (1.14 x 5.31 x 4.13 in)
Weight300 g
InstallationDIN-rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating TemperatureStandard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
Standards and Certifications
SafetyUL 508
EMIFCC Part 15 Subpart B Class A, EN 55022 Class A
EMSEN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 4,
EN 61000-4-6 (CS) Level 3, EN 61000-4-8
Rail TrafficEN 50121-4
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6
NotePlease check Moxa’s website for the most up-to-date certification status.
Warranty
Warranty Period5 years
DetailsSee www.moxa.com/warranty
  • Downloads