Moxa EDS-2016-ML-MM-ST-T 16-Port Wide-Temp Ethernet Switch

Overview

The Moxa EDS-2016-ML-MM-ST-T is a 16-port compact unmanaged industrial Ethernet switch with 2 x multi-mode fibre ports (ST connector). Port configuration: 14 x 10/100BaseT(X) copper RJ45 port(s), 2 x 100BaseFX multi-mode fibre (ST connector), total 16 ports. The EDS-2016-ML Series is engineered for harsh industrial, maritime, and rail deployments, with redundant dual 12/24/48 VDC power inputs, relay output for fault alarming, and a full stack of hazardous-location, maritime, rail, and traffic-control certifications. The wide-temperature -40 to 75 deg C rating suits outdoor enclosures, unconditioned cabinets, rail wayside applications, and maritime deployments.

Key Features

• 14 x 10/100BaseT(X) RJ45 copper ports with auto MDI/MDI-X and auto-negotiation
• 2 x 100BaseFX multi-mode fibre ports with ST connector, typical reach 4 km typical
• Store-and-forward switching, IEEE 802.3 / 802.3u / 802.3x compliant
• 2K MAC address table, 768 kbits packet buffer
• DIP-switchable Quality of Service (QoS) – prioritise IEEE 802.1p-tagged traffic
• DIP-switchable Broadcast Storm Protection (BSP) – rate-limit broadcast floods
• DIP-switchable port-break alarm – relay signal when a link goes down
• Relay output (1 A @ 24 VDC resistive) for power-fail and port-break alarm signalling
• Redundant dual 12/24/48 VDC power inputs (9.6 to 60 VDC operating range) on removable terminal block – either supply can carry the switch alone
• Overload current protection and reverse polarity protection on both power inputs
• Metal housing, IP30 rated
• Dimensions: 58 x 135 x 95 mm
• Operating temperature: -40 to 75 deg C (-40 to 167 deg F)
• Hazardous locations: ATEX, IECEx, Class I Division 2
• Maritime: DNV, LR, ABS, NK
• Rail: EN 50121-4; Traffic control: NEMA TS2
• Safety: UL 61010-2-201, EN 62368-1
• EMC: EN 55032/35, IEC 61000-6-2/-6-4
• MTBF: 2,070,826 hrs
• 100% burn-in tested on every unit
• DIN-rail mount (wall-mount kit available separately)
• 5-year manufacturer warranty

Applications

• Industrial plant-floor aggregation at cell or line level with fault-alarm relay feedback
• Maritime installations on vessels or offshore platforms (DNV, LR, ABS, NK)
• Rail wayside cabinets and signalling equipment (EN 50121-4)
• Traffic control cabinets and roadside ITS equipment (NEMA TS2)
• Hazardous-location installations in ATEX Zone 2 / IECEx / Class I Division 2 atmospheres
• Utility substation SCADA aggregation with redundant power feed
• Outdoor enclosure and unheated cabinet deployments (wide-temp -T variants)

Fibre Optic Parameters

What’s Included

• 1 x EDS-2016-ML-MM-ST-T 16-port unmanaged industrial Ethernet switch
• 1 x quick installation guide
• 1 x warranty card

DIN-rail 24 VDC and 48 VDC power supplies, wall-mount kit, and 19-inch rack-mount kit available as separately ordered accessories.

Installation & Power Redundancy

The switch mounts to a standard 35 mm DIN rail. Power is supplied via a removable terminal block at 12, 24, or 48 VDC nominal (9.6 to 60 VDC operating range) with two redundant inputs – both can be connected simultaneously to live DC sources. Either input alone can carry the switch; loss of one does not interrupt service. Overload and reverse-polarity protection are built in. The relay output closes on power failure or (optionally, via DIP switch) on port-break conditions, providing fault signalling to upstream monitoring systems.