EDR-810 Multiport Router, 8+2G SFP, -40 to 75°C

Part #: M EDR-810-2GSFP-T

8+2G SFP industrial multiport secure router with Firewall/NAT, -40 to 75°C operating temperature
  • Overview
  • Specifications
  • Downloads
  • Overview

Industrial 8+2G multiport secure router

Features and Benefits

  • 8+2G all-in-one Firewall/NAT/VPN/Router/Switch
  • Build up secure remote access tunnel with VPN
  • Protect critical assets by stateful firewall
  • Inspect industrial protocol with PacketGuard technology
  • Setup network easily by network address translation (NAT)
  • RSTP/Turbo Ring redundant protocol enhances network redundancy
  • -40 to 75°C operating temperature range (T model)
  • ISA99 / IEC 62443 / NERC CIP compliance
  • Check firewall settings with intelligent SettingCheck feature  

Learn more about Moxa’s Gigabit cyber security solutions

Introduction

The EDR-810 is a highly integrated industrial multiport secure router with Firewall/NAT/VPN and managed Layer 2 switch functions. It is designed for Ethernet security applications in sensitive remote control or monitoring networks, and provides an electronic security perimetre for the protection of critical cyber assets such as pumping/treatment systems in water stations, DCS systems in oil and gas applications, and PLC/SCADA systems in factory automation. The EDS-810 series includes the following cyber security features:

  • Firewall/NAT: Firewall policies control network traffic between different trust zones, and Network Address Translation (NAT) shields the internal LAN from unauthorized activity from outside hosts.
  • VPN: Virtual Private Networking (VPN) is designed to provide users with secure communication tunnels when accessing a private network from the public Internet. Uses IPSec (IP Security) server or client mode for encryption and authentication of all IP packets at the network layer to ensure confidentiality and sender authentication.

The EDR-810’s “WAN Routing Quick Setting” provides an easy way for users to  set up WAN and LAN ports to create a routing function in 4 steps. In addition, the EDR-810’s “Quick Automation Profile” gives engineers a simple way to configure the firewall filtering function with general automation protocols, including EtherNet/IP, Modbus TCP, EtherCAT, FOUNDATION Fieldbus, and PROFINET. Users can easily create a secure Ethernet network from a user-friendly web UI with a single click, and the EDR-810 is capable of performing deep Modbus TCP packet inspection. Wide temperature models that operate reliably in hazardous, -40 to 75°C environments, are also available.

  • Specifications
Technology
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.1Q for VLAN tagging
IEEE 802.3ad for port trunk
Protocols SNMP v1/v2c/v3, DHCP server/client, TFTP, NTP/SNTP server/client, HTTP, HTTPS, Telnet, SSH, IPSec, L2TP, IGMP v1/v2/v3, QoS/CoS/ToS, Radius, RSTP/STP, LLDP, DDNS
Routing Static routing, RIP V1/V2, OSPF
Routing Redundancy VRRP
Multicast Routing Static, DVMRP, PIM-SM/SSM
Broadcast IP directed broadcast, broadcast forwarding
Redundancy STP/RSTP, Turbo Ring V2
Flow Control IEEE 802.3x flow control, back pressure flow control
Interface
RJ45 Ports 10/100BaseT(X) auto negotiation speed
Fiber Ports 1000BaseSFP slot
Console Port Web/telnet/SSH/CLI, and RS-232 serial console
RESET button Reset to default settings
LED Indicators STATE, PWR1, PWR2, FAULT, 10/100/1000M
Alarm Contact One relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs 1 2-contact terminal block
• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA
Security Function
Firewall • Stateful inspection
• Filter: IP and MAC address, ports, ICMP, DDoS, Ethernet Protocols
• Deep Packet Inspection on Modbus TCP
Quick Automation Profile EtherCAT, EtherNet/IP, FOUNDATION Fieldbus, LonWorks, Modbus/TCP, PROFINET, IEC 60870-104, DNP, FTP, SSH, Telnet, HTTP, IPSec, L2TP, PPTP, RADIUS
NAT N-to-1, 1-to-1, bidirectional 1-to-1, and port forwarding
VPN IPSec (client/server), L2TP (server), PPTP (client), Max. 10 VPN tunnels (VPN model)
Encryption DES, 3DES, AES-128/192/256 (VPN model)
Authentication Pre-shared key (PSK), X.509v3 certificates, MD5, SHA
Data Throughput 100Mbps (10000 fps)
VPN Throughput (AES-256, SHA-256) 17Mbps
Switch Properties
Max. Number of VLANs 16
VLAN ID Range 1 to 4094
IGMP Groups 256
Power Requirements
Input Voltage 12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs
Input Current 0.37 A @ 24 V
Overload Current Protection Present
Connection Removable terminal block
Reverse Polarity Protection Present
Physical Characteristics
Housing Metal
Dimensions 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight 830 g
Installation DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95 % (non-condensing)
Standards and Certifications
Safety UL 508
Hazardous Location UL/cUL Class I Division 2 Groups A/B/C/D
EMI FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3
Rail Traffic EN 50121-4
Transportation NEMA TS2
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Note Please check Moxa’s website for the most up-to-date certification status.
MTBF (mean time between failures)
Time 981,954 hrs
Database Telcordia (Bellcore), GB
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty
  • Downloads